双柱举升机振动成因分析及优化设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Vibration Cause Analysis and Optimization Design of Double-column Lifter
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对双柱举升机由于设计不合理导致的振动问题,分析其振动的成因并进行设计优化。通过基本受力、 弯曲振动、扭转振动分析振动成因;分别从立柱布局、导轮布局2 方面优化设计双柱举升机结构。验证结果表明: 该设计可将振动控制在允许范围内,甚至消除振动,进而消除振动带来的经济损失以及安全问题。

    Abstract:

    Aiming at the vibration problem caused by unreasonable design of double-column lifter, the causes of vibration are analyzed and the design optimization is carried out. The causes of vibration were analyzed through the basic force, bending vibration and torsional vibration, and the structure of double-column lifter was optimized from the 2 aspects of column layout and guide wheel layout. The verification results show that the design can control the vibration within the allowable range, even eliminate the vibration, and then eliminate the economic losses and safety problems caused by vibration.

    参考文献
    相似文献
    引证文献
引用本文

秦 杰.双柱举升机振动成因分析及优化设计[J].,2022,41(9).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2022-05-01
  • 最后修改日期:2022-06-03
  • 录用日期:
  • 在线发布日期: 2022-09-13
  • 出版日期: