一种导弹电磁线圈弹射器方案设计与仿真分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Design and Simulation Analysis of a Missile Electromagnetic Coil Ejector
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为解决电磁线圈弹射器弹射大质量载荷时存在的机械应力大和磁场强等问题,提出一种导弹电磁线圈弹 射器方案。以某型导弹为弹射目标,建立弹射器系统模型进行仿真分析。结果表明:该方案能通过增加驱动线圈的 放电次数,使弹射器在较短的加速距离上,以较小的加速力使导弹稳定加速,获得高初速度。

    Abstract:

    Aiming at the problems of large mechanical stress and strong magnetic field when the electromagnetic coil ejector ejects large load, proposes a missile electromagnetic coil ejector scheme. Taking a certain type of missile as the target, the ejection system model is established for simulation analysis. The results show that this solution can increase the number of discharges of the driver coil, so that the ejector can accelerate the missile stably and with a small acceleration force at a short distance, and obtain a high initial velocity.

    参考文献
    相似文献
    引证文献
引用本文

王小召.一种导弹电磁线圈弹射器方案设计与仿真分析[J].,2020,39(12).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2020-07-06
  • 最后修改日期:2020-08-26
  • 录用日期:
  • 在线发布日期: 2021-01-26
  • 出版日期: