火箭贮箱零件机器人自动制孔技术
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Robotic Drilling Technology for Rocket Fuel Tank Components
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对目前火箭燃料贮箱零件制孔大多采用人工手动钻制导致的效率和精度较低等问题,提出一种火箭贮箱短壳零件的机器人自动制孔技术。以火箭燃料贮箱短壳为对象,设计柔性工装、标定方法、系统控制策略和制孔工艺,形成完整的机器人自动制孔系统。该系统可适应2 900~3 800 mm公称直径的多种型号零部件装夹,通过基于点云扫描和手眼标定方法进行孔位标定,并完成贮箱短壳零件的机器人自动制孔实验。实验结果表明:制孔工艺可实现制孔速率6个/min,孔位平均偏差0.20 mm,最大误差0.5 mm,符合实际生产要求,取得较好的应用效果。

    Abstract:

    Aiming at the problems of low efficiency and accuracy caused by manual drilling of rocket fuel storage tank parts, a robot automatic drilling technology for short shell parts of rocket storage tanks is proposed. Design flexible fixtures, calibration methods, system control strategies, and drilling processes for the short shell of rocket fuel storage tanks to form a complete robot automatic drilling system. This system can adapt to clamping various types of components with a nominal diameter of 2 900~3 800 mm. Through point cloud scanning and hand eye calibration methods, hole position calibration is carried out, and robot automatic hole making experiments for short shell parts in storage tanks are completed. The experimental results show that the drilling process can achieve a drilling rate of 6 per minute, an average deviation of 0.20 mm in hole positions, and a maximum error of 0.5 mm, which meets the actual production requirements and achieves good application results.

    参考文献
    相似文献
    引证文献
引用本文

高永卓.火箭贮箱零件机器人自动制孔技术[J].,2026,45(10).

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-02-10
  • 最后修改日期:2025-03-21
  • 录用日期:
  • 在线发布日期: 2026-10-30
  • 出版日期:
文章二维码